Samsung WW90DB7U94GB1 Manual – Series 7 Maintenance & Cleaning Tips (AI Energy Black)
Searching for the official user manual or want to know how to properly maintain your Samsung WW90DB7U94GB1 Series 7 AI Energy Black washing machine? You’re not alone. With its advanced AI features and sleek design, this washer is built for performance, but like any smart appliance, it’s essential to know how to use and care for it properly. In this guide, you’ll find a downloadable PDF manual, step-by-step maintenance instructions, and easy cleaning tips to keep your machine running smoothly and efficiently.
Maintenance & Cleaning Tips for the Samsung WW90DB7U94GB1
Keeping your Samsung WW90DB7U94GB1 washing machine clean isn’t just about hygiene — it directly impacts performance and extends the machine’s lifespan. Below are essential tips to help you take care of your washer the smart way:
Run the Drum Clean+ Cycle Regularly:
Your machine features a special Drum Clean+ cycle designed to remove bacteria and built-up residue inside the drum and rubber gasket.
Here’s how to use it:
- Tap the power button.
- Turn the Navigation dial to select Drum Clean+ (or Drum Clean, depending on your model).
- Tap and hold the start button to begin.
Important:
- Don’t use cleaning agents with this cycle—chemical residues may harm your laundry or drum.
- To avoid limescale buildup, follow detergent recommendations based on your local water hardness, or use a water softener if needed.
Drum Clean+ Reminder:
Your washer will automatically remind you to clean the drum every 40 wash cycles. If you ignore the reminder for 6 cycles, it will pause, but it’ll return on the next set of 40. Even if the display still shows “Drum Clean complete,” it’s safe to continue using the machine. Still, running this cycle regularly is strongly recommended for hygiene.
Clean the Exterior:
Wipe down the washing machine’s outer surface with a soft cloth and mild detergent. Avoid spraying water directly onto the control panel or any part of the appliance to prevent damage.
Clean the Water Inlet Mesh Filter (1–2 times a year):
Over time, debris and limescale can clog the mesh filter, affecting water flow and causing error messages like “Check water supply faucets and restart.
Steps to clean the mesh filter:
- Turn off the machine and unplug it.
- Close the water tap connected to the washer.
- Disconnect the water hose from the back and use a cloth to catch any dripping water.
- Using pliers, gently remove the mesh filter from the inlet valve.
- Soak it fully in water, including the connector.
- Let it dry completely in the shade (avoid direct sunlight).
- Reinsert the filter, reconnect the hose, and open the water tap.
With just a few simple maintenance steps, your Samsung Series 7 AI Energy washing machine can continue delivering optimal cleaning results while staying in top condition for years to come.