Samsung WA50R5200AW User Manual: Complete Guide with Self-Cleaning Feature

Welcome to the comprehensive user manual for the Samsung WA50R5200AW washing machine, specifically designed for users who require an easy-to-understand guide on operating their appliance. This model features a fantastic self-cleaning function that keeps your washer fresh and running smoothly without any hassle.

Whether you’re setting it up for the first time or looking for tips to get the most out of your washing machine, this manual covers everything in simple steps. With clear instructions and helpful tips, you’ll enjoy a cleaner, more efficient laundry experience every time.

The manual is available below for your easiest reference.

Click and Download the WA50R200AW Manual

How to Use the Self-Clean Cycle to Keep Your Washer Fresh

Regular cleaning of your Samsung washing machine helps avoid the buildup of residue and keeps it smelling fresh. Run the SELF CLEAN cycle at least once a month or after every 20 washing cycles to keep the washer tub fresh and hygienic.

Steps to run the SELF CLEAN cycle:

  1. Remove all clothes from the washing machine tub.
  2. Press the Power button to start the washing machine.
  3. Turn the Cycle Selector dial to SELF CLEAN.
  4. Press and hold the Start/Pause button to start the cycle.

Note: The SELF CLEAN cycle automatically uses hot water, and this setting can’t be changed. If there is visible residue, add 1 cup (240 ml) of liquid chlorine bleach to the bleach compartment before starting. Do not mix other detergents or chemicals during this cycle. Afterward, you can run a RINSE+SPIN cycle to clear any remaining residue.

Important Safety Tips for the Self-Clean Cycle:

  • Always ensure the washer tub is empty and dry before starting. Run a SPIN ONLY cycle if needed.
  • Avoid leaving chlorine bleach inside the tub for extended periods to prevent rust.
  • The washer will remind you to perform the SELF CLEAN cycle every 20 washes with a blinking LED on the control panel.

Cleaning the Exterior of Your Washer:

To maintain your washer’s appearance and prevent damage:

  • Turn off the water taps after use.
  • Leave the lid open to air dry the tub.
  • Wipe spills immediately with a soft, damp cloth.
  • Gently wipe the control panel gently with a soft, damp cloth, avoiding harsh or abrasive cleaners.
  • Wash the cabinet with mild soap and water.

Cleaning the Interior to Remove Odors and Residue

Periodically clean the washer’s interior to remove dirt, mold, mildew, and bacteria. Use only cleaners labeled safe for washers to protect your machine.

Preparing Your Washer for Long Periods of Non-Use

If you won’t be using your washer for an extended period:

  1. Run a QUICK WASH cycle with an empty drum.
  2. Shut off the water supply and remove the hoses from the machine.
  3. Unplug the washer and keep the door slightly open to allow air circulation.

Cleaning the Mesh Filters for Optimal Water Flow

To prevent water flow issues and avoid error codes like “4C,” clean the inlet mesh filters once or twice a year:

Step 1: Turn off the Washer

Make sure your Samsung WA50R5200AW washer is turned off. Unplug it from the power outlet to avoid any risk of electric shock while cleaning the filter.

Step 2: Disconnect the Water Hoses

Turn off the water supply to the washing machine. Carefully unscrew the water hoses from the back of the unit. Use a towel or small bucket to catch any water that may drip out.

Step 3: Remove and Clean the Mesh Filter

Use pliers (or your fingers, if possible) to gently remove the mesh filters from the inlet valves. Rinse the filters under running water and gently scrub to remove any dirt or buildup. Let them dry completely before placing them back.

Diagram showing mesh filter location and cleaning steps in a top-load washing machine

This diagram is for reference only and has been taken directly from the official Samsung model service manual.

Cleaning the Detergent Drawer

A clean detergent drawer ensures proper washing and prevents residue buildup:

  1. Fully pull out the detergent drawer.
  2. Take out the inserts and rinse them well under warm water.
  3. Use a soft brush to clean the detergent drawer and its compartments.
  4. Put the inserts back in and slide the drawer securely into place.
Diagram showing parts and layout of the detergent drawer in a top-load washer

The diagram of the detergent drawer is provided for reference purposes only and has been sourced directly from the official Samsung model service manual.

Frequently Asked Questions (FAQs)

It’s best to run the self-clean cycle at least once a month or after every 20 washing loads to keep your washer tub free from residue and odors. This routine helps maintain optimal performance and hygiene.

The “4C” error means your washer isn’t getting enough water. This could be due to clogged inlet filters, kinked hoses, or the water taps not being fully open. Cleaning the filters and checking the hose connections usually fixes the issue.

Yes, the self-clean cycle is designed to thoroughly clean the tub and may take longer than a typical wash to effectively remove residue and bacteria buildup.

First, make sure the cycle has fully completed and the water has drained. If the washer is still locked, unplug the machine for a few minutes and then try again. If it remains stuck, you may need to contact Samsung support for further help.

The Samsung WA50R5200AW can handle up to 5.0 cubic feet of laundry in a single wash, making it perfect for medium to large families.

Yes, this washer can handle bulky items like comforters and blankets. Use the “Bedding” or “Heavy Duty” cycle and distribute the load evenly to prevent imbalance. Avoid overloading the tub to ensure a proper, deep clean.

Thanks to Samsung’s advanced Vibration Reduction Technology (VRT), this model operates quietly even during the spin cycle, minimizing noise disruption.

A normal wash cycle usually takes between 45 to 60 minutes. However, it may vary depending on the load size, cycle type, and water temperature. Quick Wash options take as little as 30 minutes.

Definitely! The washer includes a gentle cycle specifically designed for delicate fabrics like silk and wool, protecting your clothes while cleaning effectively.

The Normal cycle is best for everyday loads with regular soil levels. The Heavy Duty cycle uses more water and longer wash times to clean heavily soiled or bulky items like jeans, towels, or bedding. Choose the cycle based on fabric type and dirt level.

Your washer will display reminder lights for actions like self-cleaning. Additionally, if you notice unusual noises, odors, or error codes, it’s time to check and perform maintenance.

Yes, use the fabric softener compartment in the detergent drawer. The washer will automatically dispense it at the right time during the rinse cycle. Avoid adding it directly into the tub.

If your washer isn’t draining correctly, try these troubleshooting steps:

Try using the drain and spin cycle by itself, as this can often help remove any remaining water.

Check the drain hose — Make sure it’s not kinked, bent, or clogged.

Clean the drain pump filter — Lint, coins, or debris can block it.

Inspect the drain pipe — Ensure it’s clear and not clogged.

Verify the washer is level — An unbalanced machine can affect draining.

Source: Samsung Care/Youtube

Rate this post

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *